Gas Fires - Electric Fires

Drugasar Fire Diablo Balanced Flue Gas
Product No: FS287

• Maximum heat output of 3.5Kw
• Up to 74% efficient
• Discreet access panel at the front of the fire to light the pilot and operate the fire manually as required
• Battery operated temperature display remote control as standard
• Realistic flame effect
• Glass fronted hang on the wall gas fire
• Choice of outer frame finishes that include Anthracite, Alu-Metallic, Sand-Metallic & Brushed Stainless Steel
• Balanced flue gas fire (BF) designed for homes without a chimney or flue
• Natural or Propane gas versions available
• Projection of 375mm, fully outset, off the face of the wall into the room

Free Delivery!

estimated delivery
10 working days

Price
Match

Email a Friend

Product Check

call us 0845 387 1400

 

---

Finishes | Drugasar Fire Diablo Balanced Flue Gas

Drugasar Diablo Alu-Metallic Finish

included

Drugasar Diablo Anthracite Finish

included

Drugasar Diablo Sand-Metallic Finish

included

Drugasar Diablo Stainless Steel Finish

---

Fuel Effect | Drugasar Fire Diablo Balanced Flue Gas

Drugasar Logs

included

---

Gas Type | Drugasar Fire Diablo Balanced Flue Gas

Drugasar Mains Natural Gas (NG)

included

Drugasar Propane Gas (LPG)

---

Controls | Drugasar Fire Diablo Balanced Flue Gas

Drugasar Remote Control
With Temperature Display

included

---

Extras | Drugasar Fire Diablo Balanced Flue Gas

Drugasar Ornamental Flue Pipe Cover Anthracite

Dru Up & Out Standard Balanced Flue Kit (150/80)
1000mm,90 degree bend,wall terminal in S/Steel

Dru NON-STANDARD-BESPOKE Flue Kit
Price Dependant upon Requirements

---

Specifications | Drugasar Fire Diablo Balanced Flue Gas

External Dimensions

H

685mm

W

560mm

D

375mm

---

Flue
No chimney or flue required as this fire is a balanced flue gas fire which vents up vertically then horizontally directly through an external wall. This fire does not require any electrical supply as the remote control is battery operated

Output
Maximum heat output high 3.5Kw (NG) 3.3Kw (LPG)

Details
Contemporary Hang on the wall Balanced Flue Gas Fire

Notes
NOTE:The delivery service offered on this product is based on a one man only delivery. Due to the nature and weight of this product, you will need to arrange additional assistance to offload the goods from the vehicle when it arrives at your premises. Please ensure to have a survey carried out by a Gas Safe Register registered gas installer to check and certify the compatibility of your room and intended location with this fire before making any purchase to avoid disappointment. Also ensure to study all the relevant information for installation of this appliance by reading the online installation & user instructions provided here, by clicking Drugasar Diablo Natural Gas User & Installation Instructions or Drugasar Diablo Propane Gas User & Installation Instructions before proceeding to purchase, as we cannot accept any liability in the event that this product proves to be unsuitable for your needs or circumstances. The standard balanced flue kit supplied with the fire comes off the top of the fire and raises up 1000mm minimum before venting horizontally at 90 degrees through the external wall. This fire also comes standard with an ornamental telescopic flue pipe cover which fits on top of the fire, stands vertically upwards and is designed to meet the ceiling. However this is subject to the overall height of the ceiling in the proposed room of installation as ceiling heights can vary from property to property. NOTE: The minimum height of the flue cover is 1450mm from the top of the fire with a maximum length of 1795mm fully extended, using the telescopic adjustment. Please ensure you check your ceiling height in conjunction with this appliance and it's proposed position on the wall prior to ordering. As we cannot be held responsible if the flue cover and ceiling don't meet. This appliance also comes standard with a temperature display remote control which allows the flame height to vary between high and low from your armchair once the pilot has been ignited manually. Also be aware that due to the fire producing heat the interior of the fire may become marked over time through general wear and tear which is quite normal and to be expected. The inside of the glass may also require cleaning from time to time due to condensation that may form on the inside of the glass. For more detailed information about this product including brochure requests simply click on www.drufire.co.uk