Gas Fires - Electric Fires

Specifications | Carron Fires Victorian Small Combination

External Dimensions

H

see table
mm

W

see table
mm

D

see table
mm

---

Output
x

Details
Traditional Cast Iron Combinations

Notes

		A	B	C	D	E	F	G
Bella		1040	1060	150	140	570	400	910
Crocus		710	1000	140	140	570	310	640
Tulip		880	1030	140	140	550	410	780
Tweed		1010	1020	160	240	650	420	850
Valentine		1010	1130	180	200	510	400	900
Verona		1260	1270	220	260	510	400	1070
Victorian Small		760	940	130	160	600	300	620
Victorian Large		1090	1050	170	200	580	390	920

NOTE: All measurements are in millimetres. Carron say to allow between an 8mm - 10mm, per metre tolerance allowance on all of their cast fireplaces during the manufacturing process so you should expect imperfections in accordance within these parameters due to the unique casting of such authentic reproduction fireplaces. All information contained in the website is to assist in your choice of a suitable fire and is not intended to rely on in full to organise your purchase. Before ordering please clarify with a suitably qualified installer to confirm suitability. The delivery service offered on Carron products is based on a one man, kerbside, only delivery as the couriers are not insured to carry goods in to your property. Due to the nature and weight of this product the goods will arrive palletised so you will need to arrange additional assistance to offload the goods from the vehicle/pallet when they arrive at your nominated delivery address. All Carron products are delivered on a pallet normally by a vehicle in excess of 7.5 tonnes or more so please ensure to have adequate access and to advise us in writing by email if your property has any difficulties with access as soon as you have placed your order so we can look to make alternative arrangements to avoid you incurring additional costs in the event a delivery cannot be made if the vehicle cannot deliver safely to your location. You will also need to fully unwrap and visually inspect the goods on delivery for any signs of transit damage before signing for the goods in good condition in accordance with our terms & conditions on our website. The Hearth thickness is 50mm. Please ensure to have a survey carried out by a Gas Safe Register registered gas installer to check and certify the compatibility of your chimney or flue and or circumstances with this fire, prior to making any purchase, to avoid disappointment. This fireplace requires a class 1 chimney, class 2 prefabricated flue or Electric for homes with no chimneys, depending on the model you select. The above fires do not normally require additional ventilation in the room. Please note that all the above sizes are in millimetres (mm). Output depends on flue-pull, diameter of flue and conditions of fireplace. Ensure that the room in which the cast iron product is being installed is thoroughly dry e.g recently plastered walls cause high levels of moisture in the atmosphere and, as a result, rust is almost inevitable. Under no circumstances should a Water-based cleaner or polish be used to clean cast iron products. Moisture is prone to dropping from the chimney, and is likely to cause corrosion. to minimise this it is recommended that you have your chimney swept clean and to seek advice regarding from a Gas Safe Registered or Hetas engineer regarding the installation of a chimney cowl. When using a gas fire, the products of combustion sometimes cause white deposits to form. These deposits can usually be removed with a soft brush. High temperature paint is used on all black finish items. This paint will eventually burn off. This can be maintained with our High Temperature Black paint available when purchasing the item.

All information contained in the website is to assist in your choice of a suitable fire and is not intended to rely on in full to organise your purchase. Before ordering please clarify with a suitably qualified installer to confirm suitability. If you would like further information on Solid Fuel, call the Solid Fuel Association on 0845 601 4406 or Email sfa@solidfuel.co.uk or to have a look at their website www.solidfuel.co.uk. Alternatively if you would like to find your nearest Hetas approved engineer, simply call HETAS on 0845 634 5626 or Email info@hetas.co.uk or to have a look at their Website www.hetas.co.uk where you will find a comprehensive list of engineer.

This is not intended to be all the information required to install your fire. This can be obtained from Carron themselves For more detailed information about this product visit www.Carron.uk.net.