Apex Fires Fusion HIW Gas Fire
Product No: FS3336
- Maximum heat output of 3.9kW and 56% efficient
- Supplied with a Manual control as standard with Remote Control upgrade
- Frames available are Chrome, Brushed, Textured Black or Textured Copper Finish
- Open fronted gas fire
- Modern frame and fire design with realistic Pebble effect fuel bed
- Suitable to be used in homes with a class 1 7"chimney or class 2 5" prefabricated flue
- Optional extra 5" or 7" diameter gather hood available if required
- Natural gas
- Depth of 320 mm fully inset required
Free Delivery!
estimated delivery
10 working days
was £799.00
NOW £527.00
Trims | Apex Fires Fusion HIW Gas Fire
Apex Brushed Stainless Steel Finish (Lrc)
Apex Polished Chrome Effect Finish (Lrc)
Apex Texture Black Finish (Lrc)
Apex Texture Copper Bronze Finish (Lrc)
Fuel Effect | Apex Fires Fusion HIW Gas Fire
Gas Type | Apex Fires Fusion HIW Gas Fire
Controls | Apex Fires Fusion HIW Gas Fire
Apex Manual Rotary Control
Apex Remote Control (ltc)
Extras | Apex Fires Fusion HIW Gas Fire
Apex 7inch Spiggot
Flue Connector above for illustrative purpose only
Apex 5inch Gather Hood
Flue Connector above for illustrative purpose only
Specifications | Apex Fires Fusion HIW Gas Fire
External Dimensions
710mm
870mm
N/Amm
Flue
Suitable for class 1 chimneys and class 2 prefabricated flues (5")
Output
A Maximum heat output of 3.9kW, input of 6.9kW High and 4.1kW Low
Details
Contemporary hole in the wall natural gas fire
NOTE: Please ensure to have a survey carried out by a Gas Safe Register registered gas installer to check and certify the compatibility of your chimney or flue with this fire before making any purchase to avoid disappointment. This product does not require a hearth on the floor providing the product is installed up in the wall with a minimum height from floor level as detailed in the instructions. The 5" & 7" gather hood options are available if you are connecting to a prefabricated flue or in instances where the product is being installed into an open chimney without a liner, which will also help to minimize heat loss and soot / debris falls onto the fire. Please note that whilst soot deposits on a gas fire are quite normal and to be expected, they will be more visible on a pebble or log fuel effect. Similarly you may experience discoloration on the stainless steel back panel behind the fire which will vary in degree dependent on the flue pull and other local conditions, which again is quite normal and to be expected. The Apex Fires battery operated remote control option allows the flame height to vary between high and low from your armchair once the pilot has been ignited / lit manually. It is recommended that this fire should not be used as a sole source of heat rather as a secondary source in conjunction with central heating.
or Firefox 
?