Apex Fires Rivas 60 Hole in the Wall High Efficiency Gas Fire
Product No: FS2975
- Contemporary Hole in the Wall Gas fire
- 80% efficient
- 5.5kW maximum heat output
- Choice of 5 Front Trims and 3 rear frame finishes
- Choice of either a modern Pebble fuel effect or Log fuel effect
- Desirable dancing flames
- Remote control provided as standard
- Glass Fronted inset Gas Fire
- Suitable for class 1 chimneys or class 2, (5" inch) 125mm diameter flues
- Natural Gas only
- 5 Year Guarantee
- Inset depth of 275mm (285mm minimum inset builders opening required)
- As seen on Grand Designs TV Series
Free Delivery!
estimated delivery
10 working days
was £1,299.00
NOW £1,037.00
Finishes | Apex Fires Rivas 60 Hole in the Wall High Efficiency Gas Fire
Rivas Black Texture Rear Frame
Rivas Graphite Grey Rear Frame
Trims | Apex Fires Rivas 60 Hole in the Wall High Efficiency Gas Fire
Rivas Black Texture Front Trim
Rivas Graphite Grey Front Trim
Hearth & Back | Apex Fires Rivas 60 Hole in the Wall High Efficiency Gas Fire
Apex Rivas 60 Black Back Interior
Apex Rivas 60 Cream Back Interior
Fuel Effect | Apex Fires Rivas 60 Hole in the Wall High Efficiency Gas Fire
Apex Rivas/Adara Logs Fuel Effect
Apex Rivas/Adara Pebble Fuel Effect
Gas Type | Apex Fires Rivas 60 Hole in the Wall High Efficiency Gas Fire
Controls | Apex Fires Rivas 60 Hole in the Wall High Efficiency Gas Fire
Specifications | Apex Fires Rivas 60 Hole in the Wall High Efficiency Gas Fire
External Dimensions
615mm
1020mm
80mm
Flue
Suitable for class 1 chimneys & class 2, 125mm (5" diameter) flues
Output
Maximum heat input 6.9Kw
Maximum heat output 5.5Kw
Details
Glass Fronted High Efficiency Gas Fire
NOTE: The delivery service offered on this product is based on a one man only curbside delivery. Due to the nature and weight of this product, you will need to arrange additional assistance to offload the goods from the vehicle when it arrives at your premises. We strongly recommend that you have a survey carried out by a Gas Safe registered gas installer to check and certify the compatibility of your chimney or flue with this fire and that you read the installation instructions provided, prior to purchase, to avoid disappointment. This gas fire incorporates an oxygen depletion device in its flame supervision which cuts off the gas to the burner if oxygen levels in the room become too low. Please note that whilst soot deposits on a gas fire are quite normal and to be expected, they will be more visible on a pebble or a light coloured fuel effect such as logs.
Please note the 2 sets of dimensions (shown above) under the heading "Inset Dimensions" are the minimum or maximum height and width of opening size, required in the wall, when installing this product.For more information please see www.apexfires.co.uk
or Firefox 
?