Apex Fires Averdon Inset Gas Fire
Product No: FS3831
- Maximum Heat Output of 3.8kW (Full Depth)
- Safety Features include the Flame Failure Device (FFD) and Oxygen Depletion Sensor (ODS)
- Polished Steel and Antique Brass effect trim choice
- Manually Controlled
- Fuel Bed is available in Traditional Coal or Contemporary Pebble Fuel Bed effect
- Pictured is the Gas Brass effect finish with realistic coal effect fuel bed
- Natural Gas only
- Suitable for Class 1 Chimneys or Flues
- Inset Depth 185 mm
Free Delivery!
estimated delivery
10 working days
was £449.00
NOW £353.00
Options | Apex Fires Averdon Inset Gas Fire
Apex Full Depth (Class 1) Fire
Finishes | Apex Fires Averdon Inset Gas Fire
Averdon Antique Brass effect finish
Averdon Polished Steel effect finish
Fuel Effect | Apex Fires Averdon Inset Gas Fire
Apex Coal Effect Fuel Bed
Apex Pebble Effect Fuel Bed for Class 1 Model
Gas Type | Apex Fires Averdon Inset Gas Fire
Controls | Apex Fires Averdon Inset Gas Fire
Manual Control
*Image for illustration purposes only
Specifications | Apex Fires Averdon Inset Gas Fire
External Dimensions
See Table
mm
See Table
mm
See Table
mm
Output
Class 1: Input;Max 6.8kW,Min 3.5kW
Output;Max 3.8kW,Min 1.9kW
Class 2: Input;Max6.2kW,Min3.5kW
Output;Max 3.1kW,Min 1.8kW
Please ensure to have a survey carried out by a Gas Safe Register registered gas installer to check and certify the compatibility of your chimney or flue with this fire before making any purchase to avoid disappointment. If you intend to install the Slimline fire into a Class 2 flue then subject to the depth you have, you may require a 3" 75mm deep rebated fire surround.
Output depends on flue-pull, diameter of flue and conditions of fireplace. Where there is insufficient depth a deep rebate surround may be required. This gas fire incorporates an oxygen depletion device in its flame supervision which cuts off the gas to the burner if oxygen levels in the room become too low. Also due to the sheer number of varying flue boxes it is not possible to know which fires are suitable until such time as the existing fire has been removed.
Note that whilst soot deposits on a gas fire are quite normal and to be expected, they will be more visible on a pebble fuel effect and or a light coloured fireback. Although we (and our Manufacturers) display some products in photographs with and without a hearth the ultimate decision of whether a hearth is required or not is that of your registered gas installer, as Building regulations and Gas Safe Register regulations may differ in areas throughout the UK.
However for the avoidance of doubt Apex would recommend that a hearth is installed. All information contained in the website is to assist in your choice of a suitable fire. This is not intended to be all the information required to install your fire.
For more information visit www.apexfires.co.uk.
or Firefox 
?