Gas Fires - Electric Fires

> inset stoves > charnwood stoves slx 20i inset stove

Inset Stoves

Charnwood Stoves SLX 20i Inset Stove

Charnwood Stoves SLX 20i Inset Stove
Product No: FS4636

• Maximum heat output of up to 5.4kW
• Optional boiler is available that will use 2.3kW of the heat output and is designed for heating domestic hot water only
• Suitable to be used for under floor heating
• Matt Black finish and constructed from Steel and Cast Iron
• Twin Doors with fully adjustable hinges
• Suitable for Class 1 Chimneys and Prefabricated flue installation
• 150 mm Flue only (6inch)
• Multifuel stove capable of burning a selection of fuels that include smokeless fules, wood, peat, coal, or a mixture of these
• Inset depth of 260mm

Free Delivery!

estimated delivery
10 working days

Price
Match

Email a Friend

was £1,249.00
NOW £1,085.00

QTY

 

---

Extras | Charnwood Stoves SLX 20i Inset Stove

Charnwood SLX20 Steel Boiler (PC115895)

add £100.00

Charnwood SLX20 Stainless Steel Boiler (PC115896)

add £115.00

---

Notes

		Outset Height	Outset Width	Outset Depth	Weight (Kg)	Inset Height	Inset Width	Inset Depth
	LA 20i	619	554	164	119	547	400	260
	LA 30iB	619	554	164	113	547	400	235
	LA 45iB	619	554	164	127	547	400	360
	LA 50iB	619	554	164	127	547	400	360
	SLX 20i	608	548	170	125	547	394	260
	SLX 45i	608	548	170	135	547	394	360

NOTE: The free delivery service offered on this product is based on a one man only delivery. Due to the nature and weight of this product, you will need to arrange additional assistance to offload the goods from the vehicle when it arrives. A curb-side drop off service is provided with this product. Heat outputs are based on Ancit Tests, outputs vary with fuel types. For minimum clearances please refer to installation instructions. The glass may blacken on lower settings, however increasing the heat should burn any subsidiary carbon off.

NOTE: Please ensure to have a survey carried out by a qualified Hetas approved Solid Fuel engineer to check and certify the compatibility of your chimney with this stove before making any purchase to avoid disappointment. Note: This stove produces substantial heat output which may affect the interior and exterior appearance of the stove, over time through general wear and tear which is quite normal and to expected when burning Solid Fuel. If you would like further information on Solid Fuel, call the Solid Fuel Association on 0845 601 4406 or Email sfa@solidfuel.co.uk or to have a look at their website www.solidfuel.co.uk. Alternatively if you would like to find your nearest Hetas approved engineer, simply call HETAS on 0845 634 5626 or Email info@hetas.co.uk or to have a look at their Website www.hetas.co.uk where you will find a comprehensive list of engineers.

NOTE: The LA 20i, SLX 20i and LA 30iB require a 150 Degree Flue Bend. The optional addition for hot water boilers on some stoves will alter the room output figures when used with the stove.
Note: Flue stove pipe is not included with the stove, however it is available from all good builders and plumbing merchants. For further information on Charnwood products please visit www.charnwood.com.