Gas Fires - Electric Fires

Flare by Be Modern Fires Abbey Polished Cast Iron Fascia Gas Fire
Product No: FS2295

• Maximum output of 3.5Kw for the Deluxe model, Slimline version 3.1Kw
• Manual control as standard
• Supplied with a Coal fuel effect
• Open fronted inset gas fire
• Fully Polished Cast Iron finish
• Suitable for Class 1, 2 prefabricated & precast flues
• Click here to view the
  Bemodern Brochure
• Natural gas only
• Depth of 120mm inset slimline version, 180mm inset Deluxe model
• Click here to view the
  Bemodern Abbey Slimline Installation and User Instructions
• Click here to view the
  Bemodern Abbey Deluxe Installation and User Instructions

Free Delivery!

estimated delivery
5 working days

Price
Match

was £560.00
NOW £411.00

QTY

 

---

Options | Flare by Be Modern Fires Abbey Polished Cast Iron Fascia Gas Fire

Abbey slimline 120mm deep

included

Abbey deluxe 180mm deep

add £30.00

---

Fuel Effect | Flare by Be Modern Fires Abbey Polished Cast Iron Fascia Gas Fire

Coal

included

---

Energy Type | Flare by Be Modern Fires Abbey Polished Cast Iron Fascia Gas Fire

Natural Gas (NG)

included

---

Controls | Flare by Be Modern Fires Abbey Polished Cast Iron Fascia Gas Fire

Manual Control
*Image for illustration purposes only

included

---

Specifications | Flare by Be Modern Fires Abbey Polished Cast Iron Fascia Gas Fire

External Dimensions

H

716mm

W

560mm

D

80mm

---

Flue
Both Deluxe & Slimline versions are suitable for class 1 chimneys, class 2 prefabricated & precast flues. Although a 78mm 3" deep rebated mantel will be required with the Deluxe version when installed into a precast flue.

Output
Deluxe version high 3.5Kw low 1Kw Slimline version high 3.1Kw low 1Kw

Notes
NOTE: Please ensure to have a survey carried out by a Gas Safe Register registered gas installer to check and certify the compatibility of your chimney or flue with this fire before making any purchase to avoid disappointment. *Also due to the sheer number of varying flue boxes it is not possible to know which fires are suitable until such time as the exsisting fire has been removed. Please be aware that due to the fire producing heat the interior of the fire may become marked over time through general wear and tear. Ensure that the room in which the Cast product is being installed is thourghly dry e.g recently plastered walls cause high levels of moisture in the atsmosphere and, as a result, rust is almost inevitable. Under no circumstances should a Water-based cleaner or polish be used to clean products. Moisture is prone to dropping from the chimney, and is likely to cause corrosion. To minimise this it is recommended that you have your chimney swept clean and to seek advice from your Gas Safe Register engineer regarding the instalation of a chimney cowl. When using a gas fire, the products of combustion sometimes cause white deposits to form. These deposits can usually be removed with a soft brush. High temprature paint is used on all black finish items. This paint will edventually burn off. This can be maintained with our High Temperature Black paint available when purchasing the item.