Gas Fires - Electric Fires

Apex Fires Liberty Vega Wall Hung Electric Fire
Product No: FS7425

• Contemporary Hang on the Wall Electric fire
• Heat output of either 1kW or 2kW or light effect only setting
• Modern curved black glass fascia
• Coal fuel bed as standard, twigs available a cost option
• Requiring no depth in the wall with a maximum protrusion of 215mm into the room

Free Delivery!

estimated delivery
5 working days

Price
Match

was £549.00
NOW £447.00

QTY

 

---

Fuel Effect | Apex Fires Liberty Vega Wall Hung Electric Fire

Apex Coals (Electric)

included

---

Energy Type | Apex Fires Liberty Vega Wall Hung Electric Fire

Electric Fire

included

---

Controls | Apex Fires Liberty Vega Wall Hung Electric Fire

Manual Control

included

---

Notes

		Outset Width	Outset Height	Outset Depth	Inset Width	Inset Height	Inset Depth
Liberty Vega Electric		950	750	215	n/a	n/a	n/a
Lux Arcus Electric		545	620	50	400	550	100
Lux Glass Hearth Mounted		540	616	45	400	550	100
Lux Glass Wall Mounted		540	680	45	400	550	100
Lux Orbit Electric		545	620	50	400	550	100
Lux Polar Landscape Electric		870	695	60	420	555	110
Lux Polar Portrait Electric		570	695	60	420	555	110
Lux Theta Electric		545	620	50	400	550	100

NOTE: We always recommend that you should have a survey carried out by a Gas Safe registered gas installer, HETAS installer or qualified NICEIC electrician (whichever is applicable to the goods you intend to purchase) to check and certify the compatibility of your chimney, flue, property and or circumstances prior to purchase to avoid disappointment. We also recommend that you should wait until you have the goods purchased, onsite, in your possession to take accurate measurements from before proceeding to carry out any building work or create any apertures in the wall to avoid potential costly mistakes being made, as manufacturers reserve the right to alter products or specifications without any prior notice as required.

Please note that all the above sizes are in millimetres (mm).It is recommended that this fire should not be used as a sole source of heat rather as a secondary source in conjunction with central heating. This electric product requires a 13amp socket to plug into on installation. This product can easily be installed by a qualified Electrician or competent Builder or Tradesperson. All information contained in the website is to assist in your choice of a suitable fire. This is not intended to be all the information required to install your fire