Apex Fires Liberty 6 Open Fronted Hole in the Wall Gas Fire
Product No: FS7476
- Maximum heat output up to 3.2KkW
- Fully sequential battery operated remote control as standard
- Dancing flame effect on a bed of Grey Gravel as standard with optional extra Log Fuel Effect available (see optional extras section below)
- Click here to view the
Apex Liberty Fuel Effects - Open fronted gas fire
- Comes with a Slimline trim in either Matt Black or Chrome as standard
- Matt black interior lining as standard
- 3D style reflective Black glass interior panel available as an optional extra to the rear of the fire which greatly enhances the flame effect & realism with additional flames reflecting off the Black glass panel to the rear of the fire (not the sides) which remain as standard in a Black metal painted finish
- Shown opposite with Matt Black slimline trim, Matt black interior lining and Log fuel effect
- Oxygen Depletion system monitors oxygen levels in the room as safety feature
- Optional extra flue adaptor available for use when connecting to 5" circular flue pipes
- Suitable for class 1 chimneys or class 1 & 2 125mm prefabricated flues
- No additional ventilation into the room is required as the gas input is only 6.2Kw
- Natural gas version only
- Installation of this fire also requires a 300mm hearth in front of the appliance, although this may be at floor level (not included within the price of the fire) unless installed above 300mm from the floor
- Inset Depth of 310 mm
- Click here to view the
Apex Liberty Product Information Sheet
Free Delivery!
estimated delivery
15 working days
was £1,699.00
NOW £1,199.00
Trims | Apex Fires Liberty 6 Open Fronted Hole in the Wall Gas Fire
Hearth & Back | Apex Fires Liberty 6 Open Fronted Hole in the Wall Gas Fire
Apex Matt Black Back Panel (Sir)
with black side panels
Apex Black Glass Back Panel (Sir)
with black side panels
Fuel Effect | Apex Fires Liberty 6 Open Fronted Hole in the Wall Gas Fire
Energy Type | Apex Fires Liberty 6 Open Fronted Hole in the Wall Gas Fire
Controls | Apex Fires Liberty 6 Open Fronted Hole in the Wall Gas Fire
Extras | Apex Fires Liberty 6 Open Fronted Hole in the Wall Gas Fire
Apex Flue Adaptor for 125mm (5
For illustration purposes only
Specifications | Apex Fires Liberty 6 Open Fronted Hole in the Wall Gas Fire
External Dimensions
See Below
mm
See Below
mm
See Below
mm
Output
Varies by product see details above
Details
Hole in the Wall Gas fireplaces
NOTE: Please ensure to have a survey carried out by a Gas Safe Register registered gas installer to check and certify the compatibility of your chimney or flue with this fire before making any purchase to avoid disappointment. Please note that soot deposits on a gas fire are to be expected and quite normal. Also be aware that due to the fire producing heat the interior of the fire may become marked over time through general wear and tear which is quite normal and to be expected. All sizes in the table provided are in millimeters (mm). Due to the number of size measurements on this fire it is strongly recommended that you have the appliance on site / in your possession to take accurate measurements from before proceeding to create any aperture in the wall to avoid potential mistakes being made. The Apex Fires Cirrus X2 is also referred/abbreviated to as the Apex 600 and the Apex Fires Cirrus X3 is also referred/abbreviated to the Apex 6x6 as seen in the manufacturers instructions which is all one of the same fire.
It is strongly recommended that heat resistant materials be used in the installation of high output gas fires such as Apex Fires which includes using special heat resistant plaster, fillers and associated products to help prevent surface cracks appearing on the face of the wall. Click on the following link for more information and to purchase such materials; 
or Firefox 
?