Verine Frontier HE HIW High Efficiency Gas Fire
Product No: FS2426

- Maximum heat output (NG) 3.4kW/84.3% efficient (In accordance with the new EU directive for energy ratings effective from January 2018)
- Click link to view the (NG) energy label
Verine Frontier HE HIW NG - Providing both Radiant & Convected Heat
- Bronze / Champagne Fascia ONLY
- Remote control as standard
- Coal or Pebble Fuel Effect
- Glass fronted inset gas fire
- Suitable for Class 1, 2, prefabricated and Precast
- Ribbed Fire Back
- Natural gas version available only
- Depth of 180mm fully inset
- Optional Black 50mm spacer frame can be purchased, this will reduce the depth required to 130mm when installing in to a precast flue (see optional extras section below)
- Complete with 15 year manufacturers Guarantee
- Click here to view the
Verine Fires Sales Brochure - Click here to view the
Verine Frontier HE HIW Installation and User Instructions - Click here to view the
Verine Frontier HE HIW Technical Drawings
Free Delivery!
estimated delivery
3 working days
was £1,429.00
NOW £1,131.00
Finishes | Verine Frontier HE HIW High Efficiency Gas Fire
Frontier Wall Mounted Bronze & Champagne Trim
Hearth & Back | Verine Frontier HE HIW High Efficiency Gas Fire
Fuel Effect | Verine Frontier HE HIW High Efficiency Gas Fire
Energy Type | Verine Frontier HE HIW High Efficiency Gas Fire
Verine Mains Natural Gas (NG)
Controls | Verine Frontier HE HIW High Efficiency Gas Fire
Frontier HE HIW Remote Control
Extras | Verine Frontier HE HIW High Efficiency Gas Fire
Verine Frontier 50mm Spacer B-1003890
Optional requirement for Precast flues
NOTE: All measurements are in millimetres (mm). CF is an abbreviation of conventional flue. Please ensure to have a survey carried out by a Gas Safe Register registered gas installer to check and certify the compatibility of your room and intended location with this fire before making any purchase to avoid disappointment. The touchlight top control option will only operate after manually lighting the permanent pilot, the fire is then controlled from two high level switches - On/Off and High/ Low. Mains electricity may be required. Also be aware that due to the fire producing heat the interior of the fire may become marked over time through general wear and tear which is quite normal and to be expected. The inside of the glass may also require cleaning from time to time due to condensation that may form on the inside of the glass. As with all balanced flue gas fires and glass fronted fires generally, the glass may have condensation marks appear on the inside of the glass from time to time which is quite normal and to be expected. Simply remove the glass periodically and clean the glass with a suitable glass cleaner, allow to dry thoroughly and replace accordingly.
NOTE Combustible material should be at kept away from this appliance at all times.
Click here for information on heat resistant materials that can be used with the installation of high output fires including heat resistant plaster, fillers and associated products